CAN AM ATV GRAPHICS
Shred the mud in a cutting edge high quality ATV graphics.
When it comes to Can Am ATV’s, everybody knows that they were built for the toughest of terrains. This modern all-terrain vehicle was originally built to conquer the harshest Canadian wilderness. And it can take you further than ever – meaning a safe choice to everyone looking for a real off-road warrior. Looking good where-ever you go is now possible with attractive and affordable Can Am ATV graphics kits proudly crafted by OMX Graphics.
MoreLess
OMX Graphics provides the following Can Am ATV Graphics: Can Am DS 450 Graphics, Can Am DS 6450 Graphics. Can-Am DS 90 Decals, Can Am DS 70 Graphics, Can Am Renegade 500 Graphics. Can Am Renegade 800 Graphics. Can-Am Outlander Max L 450 Graphics, Can Am Outlander Max L 500 Graphics, Can Am Outlander 800 R-XT Graphics, Can Am Outlander 1000 R-XT Graphics. Can Am Outlander 400 EFI Decals, Can Am Outlander 800 EFI Graphics. Can Am Outlander Max XT Graphics, Can Am Outlander Max XT First Generation Graphics
At OMX Graphics you will find a wide selection of great looking graphics kits for your Can Am ATV Quads. Our material is the market leader in motocross technology. Trusted by the world’s top professional and amateur motocross riders. “FLO Technology” will allow you a bubble-free application of Your Can Am ATV Graphics.
At OMX Graphics we have created a wide range of pre-designed Can Am ATV Graphics Kits for your convenience. Each kit can be customised with your name, number, logos as specified during the order process totally FREE of charge.
Be ready to wrap your quad in the toughest, coolest looking, and most durable graphics kit in the world!
Why OMX Graphics is the Right Choice?
A quad graphics kit from OMX will cover as much or as little of your 4-wheeler as you like. That includes the hood, the rear wheel mud plugs, grab bar, rear fender and more. These state-of-the-art, tough as nails graphics will transform your Can Am ATV from an oversight into the leader of the pack. If yours is an older quad the right set of ATV decals can bring it back to life.
What Makes OMX Quad Graphics Stand Out?
OMX makes the highest quality ATV sticker kits for Honda, Can Am, Kawasaki, Suzuki and Yamaha. Each and every pre-made decal or custom made graphic for your ATV is:
- Designed and printed in accordance with our unwavering quality control standards
- Printed using only the best, most effective UV resistant inks on the market today.
- Created by our highly trained technicians using state-of-the-art digital printers.
- Cut to exacting tolerances to ensure a proper fit using Summa-F series cutter – the most versatile flatbed cutting system ever;
- Laminated with a premium clear over-laminate specifically engineered for motocross and ATV’s.
The Right Way to Install Can Am ATV Graphics
Installing custom Can-Am graphics on a new or not-so-new all-terrain vehicle does require patience. As well as steady hand and a good idea of the right technique.
-
Prepare the surface –
If your ATV is brand new, this is probably not going to be an issue. In that case just wipe down the surfaces with a damp cloth and let it dry thoroughly before proceeding. If the surface is old and a bit worn wash it thoroughly, remove the remnants of any old decals and if necessary sand the surfaces that were covered by older quad decals very lightly with 400 or higher wet sandpaper (don’t continue sanding into areas that were never covered by older graphics). Once all the sanding is done, wipe the area down with a damp cloth to remove any sanding dust, let things dry out and then proceed to the next step.
-
Lay out the graphics –
Take every piece of your custom off road graphics kit and lay them all out on the floor next to the ATV. This will give you a good idea about what goes where and how well they are likely to actually fit. Then take each piece and lay it over the corresponding area on the ATV where it belongs and secure it with a small piece of tape.
-
Start with the easy ones –
If you are sure the plastics are all clean and smooth and ready to receive the new graphics start with the easiest pieces. Those would be the large flat areas like the front right and front left fenders on your custom four wheeler. Start at one end and gently lay the plastic down from your left to right, taking care to back out temporarily if you feel the graphic going in the wrong direction. Once the graphic is in place use a squeegee to push out any air pockets or bubbles and keep working the surface until it is smooth.
-
Finish with the difficult ones –
Once the large flat areas are in place and you have a bit of confidence that you’ll actually be able to do this, move on to the large, but trickier flat areas along the side of the Can-Am that may have turns or unusual contours in them. Take as much time as you need, progressing from the easier pieces to the more complex. You may need to use a hair dryer to smooth out some sections and be careful: even a squeegee can scratch the surface of new graphics. So never push too hard.
The gas tank can seem like a temptingly easy piece to install.
But in fact it must be handled with the utmost care. That’s because fumes from the gas can seep into the quads graphics and corrupt them. The best way to handle this is to empty all the gas from the tank and then let it sit with the cap off for a few days to thoroughly air out. Then wash the surface of the tank with a degreasing soap. Rinse it thoroughly and let everything dry completely. Your tank should now be ready to accept the new decals.
If you were careful to prepare the surfaces well and then take the time to install your new custom Can Am decals methodically chances are your ATV is going to look amazing when you’re done.
Custom Can Am graphics from OMX will transform your previously boring or unattractive quad into a showstopper. Just remember that proper installation requires proper preparation.
Please find out how to instal custom Can Am ATV Graphics here
Shopping Cart